The relationship between refrigerant and water in explosion-proof chemical air-conditioning

　　【】Compared with ordinary air conditioners, explosion-proof chemical air conditioners have good explosion-proof performance as an important factor for companies to choose. There is no difference in appearance and use, but in terms of production technology, both have The difference is that the explosion-proof principle of the explosion-proof air conditioner is to move all the circuit board chips inside the air conditioner into the explosion-proof control box, and the explosion-proof control box controls the operating state of the air conditioner. Secondly, the explosion-proof air conditioner uses explosion-proof treatment on the motor of the air conditioner, and the motor is sealed with glue, so that the coil in the motor is completely separated from the external environment. To put it simply, explosion-proof air conditioner means that both the indoor unit and the outdoor unit are subjected to explosion-proof treatment. Only in this way can the explosion-proof requirements be fully met.

The refrigeration system of 　　 explosion-proof chemical air conditioner is divided into two categories: direct cooling and indirect cooling system. Refrigeration cycle cooling system, indirect cooling system, including two kinds of refrigerants and refrigerant cycles.

When the refrigerant in the 　　 explosion-proof chemical air conditioner contains moisture, an ice jam will occur, which can easily block the regulating valve or the road. When it is light, it affects the refrigeration effect, and when it is severe, it makes the whole system unable to run.

　　 In addition, moisture will combine with the refrigerant to decompose, forming a precipitate. The sediment will cause the deterioration of the lubricating oil and affect the lubrication of the compressor. Some refrigerants also corrode metals when mixed with water. Damage the motor winding insulation.

　　 In short, moisture in the refrigeration system is harmful to no benefit, so we must pay close attention to it. There are three sources of moisture:

　　The refrigerant itself contains moisture, the lubricating oil contains moisture, and the air entering the system during assembly and repair also contains moisture.

　　 Therefore, in addition to paying attention to the moisture in the refrigeration oil and lubricating oil, the vacuuming work of the refrigeration system must be thorough to prevent moisture in the air from remaining in the system to avoid ice plug failure.

The refrigerant gas approach to start capacitor suppliers is becoming increasingly popular; consequently, there is a surge in the demand for .

Hangzhou E cool refrigeration Co.,Ltd is a professional manufacturer of offering some of the best in class air conditioner capacitor solutions to global market. Click Arkool Refrigeration to learn more.

With the help of a start capacitor suppliers refrigerant gas, start capacitor suppliers becomes a reasonably easy job that you can take care of simply and swiftly.

Our company is professional in manufacturing air conditioner capacitor especially start capacitor suppliers.