Refrigerant in the industrial chillers leak?

company use industrial cold water machine, if the leakage of refrigerant appear more serious question, must suspend operation. Because industrial chillers are perfect safety warning device, in present refrigerant leakage severe cases, the system will suspend industrial cold water machine is running, in order to cut the damage probability of other equipment. For special high power type of industrial cold water machine equipment, meets the leakage of refrigerant leakage needs to find the location, through professional skill for processing. And the daily operation of industrial cold water machine before, it is necessary for detailed view, pressure refrigerant pressure on normal range open industrial cold water machine equipment. If discover industrial cold water machine is refrigerant leakage of doubt, it is necessary to seal leakage gap in time, supplement the right amount of refrigerant, ensure the safety of the late industrial cold water machine operation.

cold water machine present refrigerant leakage, usually has funnelled unit parts, one of four items for refrigeration system of evaporator. Whether the joint is more, on both sides of the evaporator at the mercy of present funnelled might be a little more, it needs the factory of the evaporator welding skills of production staff.

evaporator can present funnelled, main reason or poor welding skills, in the absence of the burn (red copper pipe Failed to reach a temperature of 600 ℃ ~ 700 ℃) , just put the electrode in joint, copper tube and solder not fuse together, form a joint holder welding, MaZha, matte, use a long time, will present funnelled.

when a split type wind cold water machine evaporator leakage, leading to the machine stop, then the phone contact manufacturer to organize after-sales service personnel for processing. Evaporator in the treatment of the refrigerant leakage of doubt, able to unload welding, open way is:

1, after get the funnelled, completes the symbol;

2, if still retained inside the refrigerating system with refrigerant, must first put the refrigerant to receive;

3, with two 8 or 10 inches spanner remove indoor machine join lock mother, remove indoor machine electrical box on the right side;

4, unload evaporator back fixed line, plywood, at the mercy of positioning screw down the indoor evaporator;

5, the left hand from the indoor machine back quietly raise line, make the reach evaporator. With the right hand to pull the evaporator after 5 cm, with both hands to evaporator rotate 90 degrees, pull down the pipeline ( Pay attention to the hands operation, do not pour the fin touch) 。

evaporator after unloading, on the flat clean local, use dry cloth to go funnelled oil stains wipe clean, go funnelled with silver welding welding, suppression of view that does not leak, in accordance with the open of the order will be back to the indoor machine evaporator.

of course, there are many kinds of refrigerant leakage, perhaps, not only has funnelled evaporator, it needs to view gradually.

Hangzhou E cool refrigeration Co.,Ltd thinks that a good rule of thumb to determine whether you're working on a project.

Boasting good reputation in the industry, Hangzhou E cool refrigeration Co.,Ltd is the leading air conditioner capacitor supplier, offering high quality and refrigerant gas services for homes and enterprised all over the world. More info on Arkool Refrigeration.

When selecting the best products for customers, we considered not only the air conditioner capacitor, but also the start capacitor suppliers.