R-410A can replace R22's new environmentally friendly refrigerant-Chemours Refrigerant

The replacement of refrigerants has always been a hot topic in the air-conditioning industry. At present, R22 refrigerant is widely used in air conditioners in developing countries. It has the advantages of high efficiency and wide application fields. Its annual consumption once accounted for more than 85% of the total refrigerant. However, because R22 is a HCFC refrigerant, it will seriously damage the ozone layer. According to the Montreal Protocol, it will be completely phased out before 2030.

As a result, the international community has been actively looking for alternatives to R22. After several comparisons and screening, we finally picked R-410A.

R-410A is a two-component non-azeotropic refrigerant mixed with R32?/?R125 (50%?/?50%). With zero ozone depletion potential and very low global warming potential, its ozone depletion coefficient (ODP) is 0, and the released gas will not cause damage to the atmospheric ozone layer. Moreover, the volumetric cooling capacity of R-410A is large, the heat transfer performance is better than R22, and the heat transfer of fin heat exchanger is 35% higher than that of R22 system. Moreover, under the same mass flow rate, the pressure drop of R-410A is small, which facilitates the use of smaller diameter pipes and valves. The evaporator, condenser and other components can also be made smaller, which reduces the system cost and can also reduce by 30% Charge of refrigerant. Therefore, compared to R22, R-410A refrigerant is more environmentally friendly, more efficient and more energy-saving. Therefore, R-410A is internationally recognized as the most suitable refrigerant to replace R22 so far, and it has been widely popularized in developed countries such as Europe, America and Japan.

But not all R-410A products have the above advantages? This is really hard to say, because there are too many manufacturers of this refrigerant at home and abroad. It can be said to be a mixed bag. If the product quality is not good enough, let alone realize the above advantages, it would be a blessing to not damage our machine. Therefore, when choosing R-410A refrigerant, it is best to focus on those international brands.

If conditions permit, I suggest you choose R-410A produced by Chemours. Chemours is a world-renowned chemical company and a Fortune 500 in the United States. Its predecessor was affiliated with DuPont, the second largest chemical company in the world. It has accumulated and inherited more than 200 years of experience in chemical Ru0026D and production, enjoying a long tradition of innovation and many industry initiatives Technology, is the leader of reliable, safe and high-quality chemical production industry. It is a global leader in the three business areas of titanium dioxide technology, fluorine products and special chemicals. It has been providing first-class products, application technologies and chemical-based products to more than 5,000 customers in more than 130 countries and regions around the world Innovative solutions.

With its strong strength, Chemours’ refrigerants have been widely recognized in the international market. They are their authorized distributors in North China and must be the first choice for purchases. Absolutely No doubt authentic.

Everyone who has a start capacitor suppliers wants it to look start capacitor suppliers. However, in order to achieve that, it normally involves investing in a start capacitor suppliers air conditioner capacitor. Hangzhou E cool refrigeration Co.,Ltd can offer you the best solution.

Are you interested in buying ? We also have all kinds of in offer. Visit Arkool Refrigeration to know more and order, we have them at pocket friendly prices.

With a few simple , and a little bit of start capacitor suppliers, you to can handle start capacitor suppliers on your own.