Industrial cold water machine refrigerant recycling method

a refrigerant, how the industrial cold water machine back to the accumulator?

industrial cold water machine the refrigerant back into the concrete operation process of accumulator is: 1, open mechanism of industrial cold water cooling system of all valves, and counterclockwise budge suction valve to make it fully open, and then use the multi-purpose joint make repair valve with suction valve. 2, to repair the valve closed, suction stop valve will be dispatched to tee position; 3, clockwise to export cut-off valve closed accumulator; 4, industrial cold water machine the refrigeration compressor, evaporator in the main force that is drawn into the condenser and the accumulator.

(2) how to industrial cold water machine the refrigerant back into the cylinder?

refrigerant is special cylinder storage, refrigerant recovery in industrial water cooling machine, cylinder, 1, should be first in the suction valve of by-pass hole channel access to repair the valve with pressure vacuum gauge, the suction valve to the tee. 2, counterclockwise budge exhaust valve to fully open conditions, unscrew the exhaust valve bypass hole plug, fitted with a multi-purpose joint. 3, use the hose will be empty of refrigerant inside the cylinder cohesion on the multi-purpose joint of exhaust valve, but do not tighten the joint cohesion refrigerant cylinders. 4, slightly opened the exhaust valve, after cleaning of air inside the connecting hose, tight joint. 5, completely opened the refrigerant cylinder valves, and cooling water shower refrigerant cylinders. 6, air compressor, clockwise slowly closed exhaust valve, refrigerant within the industrial cold water machine is gradually to the refrigerant pressure inside the cylinder.

industrial cold water machine the refrigerant whether back to the accumulator is the cylinder, only refrigerant recovery of completed, then the suction pressure gauge is 0. 01 mpa, in a closed compressor running after, if the pressure has not risen suggests that refrigerant back end, if the pressure is rising, suggests that refrigerant did not draw back the clean, shall, in accordance with the above method operation again.

this release of the refrigerant, freon manufacturers, for details, please click on the query.

In the past few decades, start capacitor suppliers production has increased because of the use of refrigerant gas.

To receive more professional tips and super quality products for start capacitor suppliers, go to our website Arkool Refrigeration to place your order. Do not wait any longer.

So, what's a manufacturer to do? Familiarize ourselves with producing air conditioner capacitor in various technologies.

Digging into our roots and acknowledging out heritage can be fruitful on both a high-quality and professional level of refrigerant gas.

In various different types of start capacitor suppliers, start capacitor suppliers air conditioner capacitor is one of the most commonly used.