Analysis of Refrigerant Cycle System of Industrial Chiller

When the chiller refrigerant cycle system, the liquid refrigerant in the evaporator absorbs heat from the water and starts to evaporate. A certain temperature difference is formed between the final refrigerant and the water, and the liquid refrigerant is completely evaporated and becomes gaseous and then compressed The machine sucks and compresses. The gaseous refrigerant absorbs heat through the condenser and condenses into liquid. After being throttled by the thermal expansion valve, it becomes a low-temperature and low-pressure refrigerant and enters the evaporator to complete the refrigerant cycle process.

When the chiller is molding products, due to the variety of raw materials, the size and shape of the molded product, the required clamping force is also different. Please adjust the mold according to the actual need for z*low mold clamping力调。 Strength adjustment. In this way, power consumption can be saved and the service life of the machine can be significantly extended.

Industrial chillers must pay attention to the safety of the operation when using the machine. Please check the safety of the machine, the safety of the ejector rod and the safety door at the beginning of each operation. When the machine is running, remember not to put your hands into the clamping mechanism. When taking products, the safety door must be opened, and the safety door can only be closed after confirming the safety of personnel and no foreign objects in the mold. In addition, the hand cannot reach between the nozzle and the mold gate during operation. When repairing the mold, turn off the oil pump motor.

Screw chiller has the advantages of high efficiency, good performance, low noise, low vibration, energy saving, high reliability, long life and so on. According to customer needs and the size of the cold tonnage, a single machine or a combination of multiple machines is used. The compressor can automatically rotate alternately according to load changes, balance the operating hours of each compressor, and greatly extend the service life of the chiller.

Hangzhou E cool refrigeration Co.,Ltd is deemed as one of the leading provider of refrigerant gas products in China.

If you need air conditioner capacitor solution, you should always consult a professional provider. Hangzhou E cool refrigeration Co.,Ltd is one such a competent provider that is highly qualified to offer a wide range of products and services. Visit today!

have three basic components.