Refrigerant manufacturer summarize three kinds of methods for what good (and bad) refrigerants

< p > refrigerants to change a great contribution to human living environment, but the people understanding of refrigerant is stuck in a primary stage, think that as long as refrigerant refrigeration. Actually otherwise, the original factory big manufacturer of refrigerants, sample inspection strictly, excellent purity test instruments, quality assurance. But a few small dealers, driven to huge profits, the original factory produced after the repackaging the refrigerant of sale, quantity of refrigerant equipment pallet, unable to control refrigerant and air contact space, easy to cause the excess air content in the refrigerant, too much water, and refrigeration equipment for filling after the ice blocking phenomenon. Refrigeration equipment problems, cause compressor damage, that's really not worth the cost. < / p > < p =“文本-风格 align:中心; '> < / p > < p > inferior refrigerant can affect system performance and stability, the more serious damage will cause the system components and compressor. Refrigerant manufacturer summarize three kinds of methods for what good (and bad) refrigerant: < / p > < p > 1, whether through formal channels to purchase normal manufacturer production of refrigerants, such as price significantly lower than the market price of refrigerants, should be on high alert. < / p > < p > 2. If you have any test conditions, it is recommended to use before the refrigerant to test its purity and acidity, significantly lower than the industry standard for the test result of refrigerant is not recommended. < / p > < p > 3, if you don't have the refrigerant test conditions, it is recommended to use simple check, before the refrigerant can simple inspection method is: < / p > < p > [ 1] Refrigerant cans, inversion, and release a small amount of refrigerant to a piece of white paper, if there is a obvious impurity in white paper or liquid water, poor quality of refrigerant, is not recommended; < / p > < p > ( 2] Refrigerant, refrigerant cylinder pressure gauge testing, control the temperature and pressure characteristics, test whether the pressure in the bottle in the normal range, such as the abnormal pressure obviously is not recommended. And the refrigerant used in the middle, can test the pressure in the bottle again, for refrigerant R22 this single component, two bottles of pressure measurement value should be very close to, but for inferior refrigerants, often mixed with a variety of ingredients, refrigerant in bottle after use due to the change of composition usually there will be a large bottle of pressure difference, if encounter this kind of phenomenon, advice immediately stop using the refrigerants, and would like to have filling to the emissions of refrigerant in the system clean to avoid pollution system. < / p > < p > < / p >
Hangzhou E cool refrigeration Co.,Ltd is a gaint manufacturer of air conditioner capacitor, which is one of the most outstanding product produced from us.
We would like to offer our comprehensive service to our customers who interested in refrigerant gas.
We are proud to be a part of helping you to make healthy choices to last a lifetime. Check out our website to see all start capacitor suppliers air conditioner capacitor products we offer at Arkool Refrigeration. If you want to start that road to be better, contact us today!